Use the
Timing
menu shown below to adjust the following parameters:
•
Fine Phase
– adjust for proper ScH phase with respect to other sources. If fine
phase will not adjust properly, readjust the horizontal phase by up to ± 2 clocks
until the fine phase falls into place.
•
Hor Timing
– adjust the horizontal timing of the output signal to place the
leading edge of sync coincident with other sources.
•
Vertical Timing
– set the vertical timing to a typical setting of 0 lines.
This menu provides a
Delay
window at the bottom of the screen that will report the total
delay in lines of the module.
Model 5230/6230 Video Audio DAC
5230/6230-23
