The next group of audio menus are used when the 6230 Audio submodule is installed.
Use the
Aud Mix
menu shown below to control the audio mixing and shuffling of the
module. Each output bus assignment will be indicated by a green box.
•
Input Ch 1
– assign Input Channel 1 to the desired output bus or tie to
Channel 2. Set the input level using the slider control or by entering a number in
the window.
•
Input Ch 2
– assign Input Channel 2 to the desired output bus or tie to
Channel 1. Set the input level using the slider control or by entering a number in
the window.
•
Input Ch 3
– assign Input Channel 3 to the desired output bus or tie to
Channel 4. Set the input level using the slider control or by entering a number in
the window.
•
Input Ch 4
– assign Input Channel 4 to the desired output bus or tie to
Channel 3. Set the input level using the slider control or by entering a number in
the window.
Select the
Default
button to return to the default value. Select the
Invert
button to
invert the phase of the audio content.
Model 5230/6230 Video Audio DAC
5230/6230-20
