UV24-SA+
SET-UP
Step 1:
Step 3:
A�ach Power Cable to back of
Stand using the 2X Cable Retaining
Slots.
Step 4:
Plug In Power
Step 5:
Set Tray onto Stand with the
2X Alignment Pegs Engaged in
the 2X Alignment Slots for proper
Tray posi�on.
Step 2:
Plug In Power
UV-Clean
HOW IT WORKS
Cleaning
When posi�oned and plugged into power, your UV-Clean device will begin working.
It has
pre-set opera�on �mes.
Cleaning cycles operate autonomously throughout the life of the product.
Mo�on-sensor technology pauses cleaning cycles and relays the need to run a cleaning
cycle when people come and go.
Clean Time
: The period of �me the device is
producing UV-C. Factory set to 3 minutes.
No Mo�on Time
: The length of �me the device will
allow to pass before producing UV-C a�er the
mo�on sensor has communicated an absence of
movement. Factory set to 15 seconds.
Wait Time
: Down�me scheduled between cleaning
cycles that are unrelated to mo�on sensor ac�vity.
Factory set to 60 minutes.
Opera�on Timing
Power is on.
(supplied adapter or a USB 3.0.)
Install the UV24 onto the Stand by using the
2X #8-32 X 5/16” Long Phillips Screws.
2X #8-32 X 5/16"
Long Phillips Screws
Power Cable and
Data Cable Ports
UV24
2X Cable
Retaining
Slots
Tray
2X Alignment Pegs
2X Alignment Slots
Placement should be 6 inches
minimum from front of counter
to Tray to reduce unintended UV-C
shut-off caused by foot traffic.
