ENGLISH
EN109-1435752-42
Page
16
of
29
9
Operator controls
9.1
Operator controls
[1] Program retrieve key
Key to retrieve parameter settings from the memory.
[2] Program store key
Key to store parameter settings in the memory.
[3] Program key protocols
Key to retrieve parameter settings from the protocolmemory (grouped in clusters).
[4] Display parameter selectors
Keys for selecting adjustable parameters in the dis-play.
[5] Stop key
Key to end a treatment premature. After operationof this button the treatment time runs down to zero,
a sound signal is audible and the HF-power is shut off.
[6] Return key
Key for cancelling a choice and/or activating the previous display at programs and protocol settings.
[7] Accept key
Key for confirming a choice and/or activating the next display.
[8] Central control
Regulator for adjusting parameters.
[9] Therapy mode continuous (C) or pulsed microwave (P)
The unit automatically switches to continuous mode when switched on or at the end of treatment. It is
possible to switch from continuous to pulsed mode and visa versa during treatment.
[10] Clock
The display shows the set c.q. remaining treatment time in minutes and seconds. When the time is
expired a zero appears on the display, a sound signal is audible and the HF-power switches off. A
flashing symbol in the display indicates the clock is running and treatment started.
