Enraf Nonius Radarmed 650, Service Manual

Page: 7 / 52

Enraf-Nonius B.V. Radarmed 650 Service Manual 1409773
Introduction January 2000
1-1
1 INTRODUCTION
1.1 INTRODUCTORY REMARKS
This manual has been written for the technicians involved in the service of the Radarmed
650. Service can be carried out by the service organization of the supplier or by any other
technician authorized by Enraf-Nonius B.V.
The manufacturer will not be held responsible for the results of maintenance or repairs by
unauthorized persons.
Enraf-Nonius B.V. is further referred to as Enraf-Nonius
1.1.1 Safety Aspects
Safe execution of the procedures in this manual requires technical experience and general
knowledge of safety precautions.
Warnings, Cautions and Notes have been used throughout the manual to bring special
matters to the immediate attention of the reader.
- The Warning concerns danger to the safety of the technician or user;
- The Caution draws attention to an action which may damage the equipment;
- The Note points out a statement deserving more emphasis than the general text, but
which does not deserve a Warning or Caution.
Warning: Inside the Radarmed 650 high voltages are available, beware of electrical
shock. Do not touch components or heat sinks when the cover is removed.
The sequence of steps in a procedure may also be important from the point of view of
personal safety and prevention of damage, therefore never change the sequence of pro-
cedural steps or alter a procedure.
1.1.2 Legal Aspects
This manual and the information herein are copyright property of Enraf-Nonius B.V. (Delft,
The Netherlands).
Enraf-Nonius B.V. disclaims any responsibility for personal injury and/or damage to
equipment caused by:
- Negligence or disregard of a Warning or Caution;
- Deviation from any of the prescribed procedures;
- Execution or activities which are not prescribed;
- Ignorance of the general safety precautions for handling tools and the use of electricity;
- Repairs and/or adjustments made to the equipment with a patient connected.
1.1.3 Environmental Aspects
The following materials have been used for construction of the Radarmed 650:
- material: PMMA Front plate,