Page 28 of 46
EN109-1633750-40 IFU
Manual Operation
With Manual Operation mode, personal parameter settings can be defined for the Laser Probe.
Manual Operation has two selectable operation modes: Points (cm
2
) or milliwatt.
1) Selecting Manual Operation
in the Home screen will bring
up the channel selection
screen.
2) Select on which channel the
therapy should be executed: A
or B.
The channel names are linked
to the connected Laser Probe.
When only a single probe is
connected this screen is
skipped (defaults to this
probe). If no probes are
connected you can only select
System Settings on the Home
screen.
3) Select the desired operation
mode of the laser.
For manual mode Points (cm
2
)
you can select the dosage, the
number of points and joule per
point. This will calculate the
operation time.
For manual mode milliwatt you
can select the time and
dosage. Total dosage is
automatically calculated.
