IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a
combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the
supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in
the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product
acceptance by Authorities Having Jurisdiction.
This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material,
manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of
non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing.
Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc.
Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
The most updated information on this Certificate of Listing is available online at pld.iapmo.org
Effective Date:
January 2019
Void After: January 2020
Product:
Drinking Water Treatment Units – PFOA & PFOS
File No. W-11467
Issued To:
Enpress Llc
34899 Curtis Blvd.
Eastlake, OH 44095
Identification:
The product packaging shall be marked with the model number and
a)the manufacturer's recognized name, trademark, or other mark; or
b)in the case of private labelling, the name, trademark, or other mark of
the customer for whom the fitting was manufactured.
c)a functional description of the system (e.g., chemical reduction)
d)maximum operating temperature in degrees C (degrees F)
e)maximum working pressure in kPa (psig)
f)for activated carbon systems: "Do not use with water that is
microbiologically unsafe or of unknown quality without adequate disinfection
before or after the system."
Characteristics:
The systems addressed by this standard are designed to be used to reduce PFOA
and PFOS that may be present in drinking water (public or private), which are
considered health hazards.
Products are to be installed in accordance with the manufacturer's
instructions and local codes.
