PIONEER
™
SPECIFICATIONS
PIONEER
NAME AND
PART NUMBER
PEAK FLOW &
% REDUCTION
OF LEAD
CHLORINE/CHLORAMINE TASTE
AND ODOR REDUCTION CAPACITY (*)
PRESSURE
DROP
SPEC
PIONEER
™
System
CTA0840BBBKP5-04C00
REPLACEMENT CARTRIDGE FILTERS ARE LISTED AS PIONEER™ 0.5 Micron High Capacity Carbon Block // PART NUMBER:
CT-05-CB-AMYCL
9 psid
@ 4.51 GPM
8 GPM (30.2lpm) @
99.62% reduction
(*) >88,000 gallons
at 8 GPM (333,116
Liters @ 30.2lpm)
>300,000 gallons @ 15 GPM (1,135,533 Liters @ 56.8 lpm)
with greater than 90% reduction, estimated capacity using
2ppm of free chlorine.
>150,000 gallons @ 8 GPM (567,812 Liters @ 30.3 lpm)
with greater than 85% reduction, estmated using 3ppm
of chloramine.
*Claims are not performance tested by IAPMO or NSF. Performance claims are based on independent laboratory and manufacturer’s internal test data.
Actual performance is dependent on influent water quality, flow rates, system design and application. Results may vary.
Model Number of the system in which the filter component is to be used with CTA0840BBBKP5-04C00
SIZE &
MICRON
RATING
RATED CAPACITY
& FLOW RATE
8” x 40”
0.5
Lead Reduction and PFOA/PFOS
100,000 gallons @ 4.51 GPM
(378,541 Liters @ 17.1 lpm)
@ 99.62% lead reduction
@ 97.9% PFOA/PFOS reduction
ENPRESS®, ONE
®
, WATER FILTRATION SIMPLIFIED
®
AND PIONEER™ are trademarks of ENPRESS, LLC.
© ENPRESS LLC 2018 | PIONEER
™
is an ENPRESS Filtration Technology | 2019-0103
If you have any questions regarding your water filter, contact your local dealer, OEM, or the manufacturer at the following:
For more information, visit enpress.com or onefiltration.com
THANK YOU FOR CHOOSING PIONEER
™
POWERED BY
Where Innovation Flows
™
PERFORMANCE
Performance claims are based on independent lab results
and manufacturer’s internal test data*. Actual performance is
dependent on influent water quality, flow rates, system design
and applications. Your results may vary. Performance claims
are based on a complete system, including a filter, housing,
and connection to a pressurized water source. This filter must
be operated according to the system’s specifications in order
to deliver the claimed performance. It is essential to follow
operational, maintenance, and filter replacement requirements,
as directed for each application, for this filter and system to
perform correctly. Read the Manufacturer’s Performance
Data Sheet accompanying the system and change the filter as
suggested. The contaminants or other substances removed or
reduced by this water filter are not necessarily in all users’ water.
IMPORTANT
DO NOT USE
extra lubricants, unapproved sealants and tools
to tighten hand tightened only parts. Use of tools other than
hand tighten only parts voids warranty. Testing was performed
under standard laboratory conditions; actual performance may
vary. Flush the system and change the filter as suggested. The
contaminants or other substances removed or reduced by this
water filter are not necessarily in all users’ water.
WARRANTY
LIMITED LIABILITY
- ENPRESS LLC makes no warranties of any
kind, expressed or implied, statutory or otherwise, and expressly
disclaims all warranties of every kind, concerning the product,
including, without limitation, warranties of merchantability and
fitness for a particular purpose, except that this product should be
capable of performing as described in this product’s data sheet.
ENPRESS LLC’s obligation shall be limited solely to the refund
of the purchase price or replacement of the product proven
defective, in ENPRESS LLC’s sole discretion. Determination of
suitability of this product for uses and applications contemplated
by Buyer shall be the sole responsibility of Buyer. Use of this
product constitutes Buyer’s acceptance of this Limited Liability.
CERTIFICATIONS
MANUFACTURED BY
This ENPRESS pressure vessel
is tested and certified by NSF
International against NSF/ANSI
Standard 44 and 61 for materials and
structural integrity requirements
COMPONENT
EPA Est. 092577-OH-001
ENPRESS, LLC. | 34899 Curtis Blvd., Eastlake Ohio 44095 | Phone 866.859.9274 | Fax 440.510.0202 | [email protected]
SUBSTANCE
INFLUENT CHALLENGE
CONCENTRATION
(MG/L)
MAXIMUM PERMISSIBLE
PRODUCT WATER
CONCENTRATION (MG/L)
Lead
Cyst
PFOA/PFOS
0.15 +/- 10%
minimum 50,000/L
1.5 +/- 10%
0.01
99.95%
0.07
Minimum Operating Temperature
34 F / 1 C
Maximum Operating Temperature:
120 F / 50 C
Minimum Operating Pressure:
20 psig / 1.38 bar
Maximum Operating Pressure:
125 psig / 8.6 bar
Electrical Requirements:
Grounded & Unswitched 115 V outlet and
3-AAA Batteries
Filter Replacement Operating Instructions:
New cartridges must be
flushed for a minimum of 10 minutes prior to use. System and installation
to comply with state and local laws and regulations.
Do not
use with water that is microbiologically unsafe or unknown
quality without adequate disinfection before or after the system.
Systems certified for cyst reduction may be used on disinfected waters
that may contain filterable cysts.
Manufactured from NSF/ANSI standard 61 and California Prop 65
Compliant certified coconut shell carbon and raw materials.
NSF/ANSI
STANDARD
53
53
P473
This ENPRESS system is certified
by IAPMO R&T against NSF/ANSI
Standards 53 and P473 (also CSA
B483.1) for the reduction of claims
specified on the performance
data sheet.
This system has been tested for the reduction of the
substances listed below. The concentration of the indicated
substances in water entering the system was reduced to
a concentration less than equal to the permissible limit for
water leaving the system, as specified in NSF/ANSI 53 and
P473. Minimum substance reductions are as follows:
