Page 2
© 2021 Enphase Energy. All rights reserved. Enphase, the Enphase logo, IQ8 microinverters,
and other names are trademarks of Enphase Energy, Inc. Data subject to change.
ZRT-UM-0001-01-EN-US-2021-12-29
Section I: Ordering and assembling Range
Test nodes
Two Range Test nodes are required to conduct a Range Test. An assembled Range Test note
is shown below:
Range Test Zigbee Dongle:
The NA version of Range Test Zigbee dongle can be bought from Enphase Store:
. For EMEA, use COMMS-KIT-EU-01. Open the Communications kit enclosure to
extract the Range Test Zigbee dongle. The barcode on the Communications kit should be
peeled off and placed on the Range Test Zigbee dongle. One Communications kit each is
required for each of the two nodes.
Range Test Zigbee dongle
USB C to USB 3 Adapter
Power bank
Velcro
Peel barcode sticker
and place on dongle