Chapter 2 INSTALLATION
12. CD-IN connector (J11)
This connector supports CD-ROM Audio signal input from
CD-ROM driver.
13. Flash ROM Vpp Select Jumper (J6)
This jumper selects Vpp for the Flash ROM. By default, it's set to +5V
(pins 1-2). Moving the jumper cap to pin 2-3 sets the Vpp to +12V. If
you change the ROM chips, you should check the specifications to be
sure you set the right value.
EP-PT22 User’s Manual
22
R-IN
-
-
L-IN
CD-IN Connector
+5v
