ENPC EP-KB11, User Manual

Page: 12 / 33

III-4 Install Expansion Cards
Expansion Card Installation Procedure

Read the documentation for your expansion card and make any
necessary hardware or software settings for your expansion card,
such as jumpers.

Remove your computer system's cover and the bracket plate on the
slot you intend to use. Keep the bracket for possible future use.

Carefully align the card's connectors and press firmly.

Secure the card on the slot with the screw you removed above.

Replace the computer system's cover.

Set up the BIOS if necessary (such as IRQ xx Used By ISA: Yes in
PNP AND PCI SETUP)

Install the necessary software drivers for your expansion card.

This motherboard also provides an AGP (Accelerated Graphics Port)
slot to support a new generation of graphics cards with ultra-high
memory bandwidth.
WARNING!
Unplug your power supply when adding or removing expansion cards or
other system components. Failure to do so may cause severe damage to
both your motherboard and expansion cards.
AGP Slot
4 PCI Slots
3 ISA Slots