3) Check that the Ethernet cable has been connected correctly.
4) Check the power throughput at the overcurrent protection,
residual current protection or circuit breaker in the meter box,
before turning on the charging station protection.
Switching on the charging station
1) Switch on the power for the circuit on which the charging station
is installed.
As the charging station initializes, its LED light will flicker yellow.
2) Wait until the LED light stops flickering and stays off, indicating
the initialization is complete. This may take 5 to 10 minutes.
Note: Tripping the overcurrent protection or residual current
protection may be caused by a grounding error, leakage or
faulty relay. If, after resetting the protections, the product
cannot be reactivated or the protections are tripped again,
contact the installer or relevant provider(s).
You are now ready to configure the charger.
7. HOW TO CONFIGURE
The charger can be configured using the My-eNovates app, available
in the App Store and Play Store. The app is compatible with phones
running Apple IOS 12 or a more recent version, as well as phones
running Android 10 or a more recent version.
You will need the following tools and information to configure the
charger using the app.
• Installer QR code (check the back of this guide)
• Bluetooth connectivity on phone
• Max current charger
• Max current house
• Manual or preset configuration
• Optional loadshedding and loadshedding type
25