your preferred orientation. There are circular holes in the bottom
and the back of the wall bracket, from which cables can pass
through the cable block into the charger unit. Remove the bridge
component from the cable block. Pull the cables through the
circular holes and through the cable block.
2) Use the provided 2 M5x16 (Torque 1.2Nm) screws to secure
the cable block to the wall bracket. Keep the bridge component
nearby.
1
2
1: cable from back (wall)
2: cable from below (ground)
Slide the charger onto the wall bracket.
1) Align the niche with the wall bracket.
19
