Preface
Dear Customer,
Thank you for selecting ENOTEC for your InSitu Flue Gas measuring system.
For more than 35 years now ENOTEC's Analyzer Systems have been operating in numerous applications with thousands of
units being produced and shipped around the world.
ENOTEC is committed to total quality and performance and we have continuously enhanced our products to integrate various
features and functions. In this package, the electronic unit uses the very latest Microprocessor Technology, making the SME5
electronic unit one of the most advanced and up-to-date monitoring units, permitting you to reduce your maintenance & fuel
costs, and to achieve increased measuring accuracy with more operational reliability using these new monitoring functions.
In all measuring probes you will find that the O
2
Sensor is soldered in place using a special process and technique developed by
ENOTEC. This results in a considerably increased service life compared to „glued or cemented“ competitors measuring cells,
which have a tendency to leak or crack during operation. ENOTEC's sensors have a proven gas gas-tight design, providing
greater measuring accuracy, durability and longer working life time.
All ENOTEC instruments are thoroughly tested in the factory and are subject to a strict ISO9001 Quality Assurance Procedure.
Therefore, with the correct installation, the operation of the analyzer is very straightforward and user friendly and will provide
you with many years of trouble free operation with perfect measuring results.
Notes concerning this Manual
This manual contains important information concerning the design, installation, commissioning, operation, maintenance and
troubleshooting. To work safely with the analyzer, become familiar with all warnings, safety instructions and maintenance tasks
of this manual.
Symbols used in this Manual
Important information as well as safety instructions are emphasized by the below-mentioned symbols. Make sure that all safety
advice and warnings are observed at all times.
Warning
Follow all instructions in this manual
Consider Information
Points out important information which must be
noted before execution
Warning hot Surface
Warns of danger of burns which could occur from
hot system parts
Info
Contain further detailed information
Caution
Warns of risks by destroying the system or its
components or its functionality
Ground earth electrical protection
The contents of this manual are protected by copyright. Alterations and errors reserved.
Safety Instruction
The analyzer is operated with line voltage. After removal of terminal covers some parts of the system may be accessible
which could be already under high line voltage.
Only well trained and authorized personnel are allowed to work on this system. Personnel must know and understand all
precautions, safety instructions, installation and maintenance instructions of this manual. The trouble free and safe operation
of the system requires safe transportation, professional storage, installation, operation and maintenance.
Furthermore all local safety requirements at that point of installation and operation must become considered.
The analyzer system is a system for measuring the oxygen concentration in flue gases and other non-combustible gases. For
reasons of safety and the possibility of accidents, unauthorized conversions and modifications of the system are prohibited
The device may only be put into operation if the enclosed instructions have been fully understood.
This manual is also available in other languages on request.