TIMER RANGES:
Ranges
sec
min
hours
10h
1
Time range
da 0.1s a 1s
da 0.1 min a 1 min
da 0.1h a 1h
da 1.0h a 10h
5
da 0.5s a 5s
da 0.5 min a 5 min
da 0.5h a 5h
da 5h a 50h
10
da 1.0s a 10s
da 1.0 min a 10 min
da1.0h a 10h
da 10h a 100h
50
da 5s a 50s
da 5 min a 50 min
da 5h a 50h
da 50h a 500h
All the PM4H-W models are multirange with 16 selectable ranges.
SETTING MODE
1) Selection of the operating mode
[PM4H-A]
Turn the appropriate selector with a
screwdriver to set one of the 8 different
operating modes. The achievement of the
various modes is signaled both by a "click" and
by the display of the symbol corresponding to
the functioning mode.
If the position reached is not stable, the timer
may not work correctly.
2) Setting of the time range (for all
models)
Turn the appropriate selector with
a screwdriver to set one of the 16
time ranges from 1s to 500h. The
set time increases by turning the
selector clockwise and decreases
by turning it counter-clockwise.
3) Setting of the time (for all models)
Turn the time setting knob to reach
the desired one. When you want to
use the instantaneous output, check
that the indicator is positioned under
the "0" (instantaneous exit zone).
Once power is supplied, it is no
longer possible to change the time
range, set time or operating mode.
To make a new setting it is necessary
to turn off the power or reset the
timer.
How to use “Stop ring” [PM4H series]
1) Fixed time setting
Set the desired time and put 2 stop rings
together.
Insert the rings into stopper to fix the
time.
2) Fixed time range setting
Example: Time range 20s to 30s.
a)
Shorter time value setting
Set the dial to 20s.
Place the stop ring at the right side of
stopper.
b)
Longer time value setting
Set the dial to 30s.
Place the stop ring at the left side of
stopper.
Range impostato
