22. Return the evaporator cover removed in step
17 to its normal position.
23. Rotate the control knob to the Normal position.
24. Operate the machine with the cleaning toggle
switch in the Operation position for 4 minutes.
25. Switch the cleaning toggle switch to the
Cleaning position and operate the machine for 1
minute.
26. Repeat steps 23 and 24 five times. After the
fifth time rotate the control knob counter clockwise
to the Off position.
27. Remove evaporator cover. Pour sanitizer
solution over the entire surface of the evaporator
section and wash or spray the evaporator cover
bottom with sanitizer. Return evaporator cover to
its original position.
28. Remove curtain, remove clamp and drain cap
from the bottom of the reservoir, allow all the water
to drain out. Return the drain cap and clamp to
their original positions.
29. Thoroughly spray or wipe the interior of the ice
storage bin, bottom of the evaporator cover and
the spray platform with the sanitizing solution.
30. Completely immerse the curtain in the
sanitizing solution.
31. Return the evaporator cover and curtain to
their original positions.
32. Reconnect water supply.
33. Rotate control knob to its original position.
Switch the cleaning toggle switch to the Cleaning
position for two minutes and then switch it to the
Operation position. Operate the machine until one
batch of ice has been released into the bin. Pour
warm water over the ice to melt it.
34. Return the front panel to its original position
and secure with the original screws.
CU0515
July 2007
Page 16
Remove Thumb Screw Holding Curtain
Remove Curtain
