USER MANUAL
STM 550X / EMSIX
–
ENOCEAN MULTI-SENSOR
© 2020 EnOcean | www.enocean.com F-710-017, V1.0
STM 550x / EMSIx User Manual | v1.0 | February 2020 | Page 73/79
8.5.28
ILLUMINATION_TEST_RESULT
If STM 550x has executed an illumination test as described in chapter 2.3.5 then the result
(the measured average light level at the solar cell) will be stored in the ILLUMINA-
TION_TEST_RESULT register shown in Figure 54 below.
ILLUMINATION_TEST_RESULT (Default Setting: 0x0000)
Bit 15
Bit 14
…
Bit 1
Bit 0
ILLUMINATION TEST RESULT
Figure 54
–
ILLUMINATION_TEST_RESULT register
8.6
USER DATA
The USER DATA area allows the user to read and write up to 64 byte of data after entering
the correct PIN code. Typical use cases include storing information about the configuration
or the installation of the device (by whom, when, what).
STM 550x does not use this area and does not interpret its content in any way.