© 2019 EnOcean | www.enocean.com
User Manual May 2019 | Page 49/49
USER MANUAL
Scavenger Transmitter Module
STM 330 / STM 331 STM 331U / STM 332U / STM 333U
(Stepcode DE and later)
6.2
Rechargeable accumulator
In order to conserve the energy level of the rechargeable accumulator, OEMs should put
the final product with housing to transport mode
In specific markets e.g. EU a rechargeable accumulator (secondary battery) requires
additional markings at product label & documentation. A registration according to battery
law could be required.
According to the manufacturer of the rechargeable battery following warnings apply:
1.
Do not charge by high current or high voltage. Doing so may generate gas inside the
battery, resulting swelling, catching fire, and heat generation or bursting.
2.
Do not heat, disassemble nor dispose of in fire Doing so damages the insulation ma-
terials and may cause catching fire, heat generation, leakage or bursting.
3.
Do not solder directly to the battery If soldering is performed directly to the battery,
the battery is heated up, consequently cause leakage, explosion or fire due to over-
heating from internal short-circuiting.
4.
Do not short. If the (+) and (-) come into contact with metal materials, short-
circuiting occurs. As a result, catching fire, heat generation, leakage or bursting.
5.
Keep batteries/module out of children’s reach. If leaked liquid is ingested or a bat-
tery is swallowed, consult a physician immediately.
6.
Do not reverse placement of (+) and (-) If the (+) and (-) side of the battery is re-
verse inserted; it may cause a short-circuiting or over discharge of the battery on
some equipment and it may induce overheating, explosion or fire.
7.
Do not discharge by force If the battery is discharged by direct connection to an ex-
ternal power supply etc., voltage of the battery will decline lower than 0 volts (elec-
trical reversal) and will cause the battery case to expand, overheat, leak, explode or
burn.
8.
In case of leakage or a strange-smell; keep away from fire to prevent ignition of any
leaked electrolyte.
9.
In case of disposal, insulate between (+) and (-) of battery by an insulating Jum-
bling batteries or with other metal materials cause short-circuiting. As a result,
catching fire, heat generation, leakage or bursting.
