Quick Start Guide
Navigan™ Wireless Commissioner NWC 300 / NWC 300U
© 2016 EnOcean | www.enocean.com
Navigan | v1.0 | Aug 2017 | Page 9/ 9
6
STEPS TO CONFIGURE AN LED CONTROLLER
Use the configuration Tab and then follow the instructions for each parameter. Holding your
mouse over any box will bring up the list of options and a description.
Your installation will have unique requirements that should be adjusted as needed. Please
speak with your project coordinator to have a clear understanding of your project
requirements.
Brightness level when the sensor turns the
lights ON automatically. 0-100%
Brightness level when the sensor turns the
lights OFF automatically. 0-100%
Time after last motion detected before a motion
sensor turns the lights out. 3-71582 minutes.
What happens when a motion sensor sees
motion and the lights are out… does it Auto ON
or not.
New maximum (and Minimum) output on the 0-
10V line. Used for top trim, task tune, max light
level adjustment.
Uploads Changes to the controller that are
indicated by Yellow highlighting. Yellow items
are not yet part of the controller logic.
For more Advanced parameter adjustment click
“go To Advanced”. Each parameter is explained
inside. For support please email
