Quick Start Guide
Navigan™ Wireless Commissioner NWC 300 / NWC 300U
© 2016 EnOcean | www.enocean.com
Navigan | v1.0 | Aug 2017 | Page 8/ 9
Step 4: Validate that the controller properly responds to input from the linked sensors or
rockers according to the configuration.
Hint 1
If the switches and sensors show up in this list they are actively paired
to the controller and will control it. To add more devices to this
controller click on “Add Links” and repeat the process.
int 2
The
indicates the software has not heard from that device recently.
It is still paired correctly. Pressing the switch or sensor will remove the
Hint 3
Pressing the learn button on a sensor will flash all controllers it is
actively paired with. This is a good test to make sure you paired them
correctly.
Step 5: Repeat 1 – 4 for each controller you want to commission.
Step 6: Perform a functional validation of the full installation and save your project for
future reference before closing Navigan™.
Click on “Configuration” Tab to move to the next
step.
