Guidebook – sunlight pump – ennos AG
Date:
18.01.2017
Page
23 of 32
copyright
ennos 2017
10.1.1.1.1.1.1.1
Connect overflow switch to
electronics
Connect the overflow switch to terminal 3 and 4 in the
junction box attached to the sunlight pump.
10.1.1.1.1.1.1.2
Connect MC4 connectors
Connect panel negative connector (black) and positive
connector (red)
10.1.1.1.1.1.1.3
Green Power LED should be
shining
As soon as the panel is connected, the green power
LED between the Mode and the Reset Button should be
shining.
10.1.1.1.1.1.1.4
As soon as there is sufficient sunshine,
the pump should start automatically.
If not, please refer to explanation of operating states
(chapter 11) and troubleshooting (chapter 12) hereafter.
7
