Enlightened Audio Designs TheaterMaster, Owner'S Manual

Page: 31 / 56

VI. Basic Operation
A. Power-up:
Bringing the TheaterMaster out of Standby is accomplished by pressing the
POWER
button
(

) on the remote control, or pressing the front-panel Power/Mute switch.* Double-clicking
the
POWER
button (or pressing the
off
button in some remotes) take the TheaterMaster
back to standby again.Another way to go to standby is to double-click the
POWER
button,
or double-click theTheaterMaster’s front-panel Power/Mute switch.
*The first time you come out of Standby after cold AC power-up, a list of performance features will be displayed. You
may exit from these features screens at any time by pressing the
POWER
key again. Double-clicking the remote’s
POWER button may be easier to achieve if the remote’s “beep” is turned off (press the speaker icon in the
i
screen).
B. Selecting a digital input:
Selecting a digital input can be accomplished in two ways. One is to press the desired input
button,
Inp 1, Inp 2, Inp 3, Inp 4, Inp 5
or
Inp 6
on page 1 of the remote’s
TheaterMaster
device. The other way is to repeatedly press the
NEXT
input or
PREV
input buttons on the
lower part of the remote control, until the desired digital input is reached. The TheaterMas-
ter’s digital input circuitry will automatically lock onto the selected input, and the “(No
Lock)” indicator on the TheaterMaster’s Main LCD display screen, shown below, will disap-
pear.
[If the (No Lock) indicator continues to show, confirm that you have an active digital source
connected to this input.]
C. Selecting an analog input:
Selecting an analog input is accomplished in two ways. One is by pressing Analog followed
by Inp 1, Inp 2 or Inp 3 on the remote control ( Analog - Inp 1, Inp 2, Inp 3, Inp 4, Inp 5
or Inp 6 on the TheaterMaster Signature. ) Multiple key press sequences, such as this one,
31
Main Screen
Source Indica-
tor Display
Playback
Mode
HDCD Detect
(Chap. VII)
Input
Indicator
Source
Identifier
(Chap. VIII)
CinEQ TM
Indicator
(Chap. VII)
Master Volume
Indicator
Digital Error/
Analog Clipping
Indicator
EQ