Sauna Installation Instructions
Please read the following directions carefully
.
The sauna installation requires a minimum of 2 people. You should not try to install the sauna on your
own as damage may easily occur.
Caution
1.
No plumbing or plumbing fixtures should be placed in the sauna.
2.
Keep all liquids away from the heating panels.
3.
Install the sauna on a completely leveled surface.
4.
Flammable objects and corrosive chemical substances should be kept far away from the sauna.
Your infrared sauna will come packaged in five boxes (seven boxes for peak roof saunas). Please
make sure that you open the boxes FACE-UP. Please be very careful when opening the boxes!
BOXES CONTAIN FRAGILE PARTS AND GLASS!
Connecting the Panels:
Each sauna offers two types of panel-locking systems to connect the different sides of the sauna.
Please use the instructions below as a reference guide on how to connect the sauna panels.
Inner-Locking System:
The inner-locking system is designed to be completely invisible when the sauna is installed. The locks
are built on the side of each panel and they connect by sliding one over the other (Figure G-2).
To connect two panels, follow these few steps:
4
