1.Turn on the light wave.
Click the "On/Off"(1) button to turn the light wave on or off. In the power-on state, The first
click is to turn on the light wave, and the second click is to turn off the light wave. After setting the
temperature (30-65), the system temperature has a memory function,
and the last set temperature is
the value
. Time defaults to a maximum of 60 minutes
2.Temperature setting
After turning on the light wave, click the tempe and temperature - to adjust the
temperature of the light wave, the temperature adjustment range is 30-65
℃
, Click once to increase
or decrease by 1
℃
; when the temperature is lower than 30 degrees, the display is --
Fahrenheit and Celsius conversion: long press TEMP + button for 10 seconds, you can convert
Fahrenheit and Celsius
3.Time setting
The time can be adjusted from 5 to 60 minutes, click once to increase or decrease by 1 minute.
When the countdown reaches 0 minutes, the buzzer will sound 3 times, each interval is 1.5S.
4.Lamp function
1. When the light wave is turned on, click the "Lights"(9) button to switch the light. The light
parameters are: AC220V 50W (if you need to use the DC12V lamp, please connect the external
switching power supply)
2. When the light wave is turned on, click the "Lights"(9) button, when the clock area shows
‘2n’, the temperature area displays “LX”. Press the "Lights"(9) button to change the color of the LED
light. Press once to convert one color, can cycle and remember (L1 full bright L2 red blue L3 blue L4
blue-green L5 green L6 green red L7 red L8 jump L9 gradient)
3. Do not press the "Lights"(9) button within 8 seconds, the time window exits 2n, the
temperature window exits Lx, the color of the LED light retains the current state and exits the light
control logic lock function.
4. In the 2n state, LED lights and high-voltage spotlights can be individually switched: tap
time-and time+ can independently control switch LED lights and spotlights
5.Audio function (can be controlled independently):
1. Press the “FM”(5) button to turn on the radio function, the temperature zone displays the
frequency, the clock zone displays “XX”, the time +/- adjusts the volume, the tempe/- adjusts
the frequency, and the button has no button response for 8 seconds, the display switches to
temperature and time.
2. Press the “AUX”(6) key to turn on the AUX function, the temperature zone displays AUX,
the clock zone displays “XX”, the time +/- adjusts the volume, and the button has no button response
for 8 seconds, the display switches to temperature and time.
25
