Step 9. TOP PANEL Placement:
Step 1.
Raise the top panel over the sauna body. Insert the wires for the control panel, temperature
sensor, and heaters through the openings in the ceiling.
Step 2.
Connect the control panel wire (white ribbon) and the heat sensor (2-pin wire) on top of the
sauna. In order to connect the cables just follow the labels on the cables.
Step 3.
Connect the heaters’ plugs into the control box. Even though the heaters’ plugs might be
labeled, they can connect into any sockets on the control box (Figure A-6).
Figure A-6: Top Panels and Connections
Note: Accessories installation instructions continue below the outdoor models.
If you bought an Indoor Version, the Top Panel is your Indoor Roof. Skip OUTDOOR ROOF
ASSEMBLY INSTRUCTIONS.
If you bought an Outdoor Version, please proceed with the OUTDOOR ROOF ASSEMBLY
INSTRUCTIONS.
25
