Inner-Locking System:
The inner-locking system is designed to be completely invisible when the sauna is installed. The locks
are built on the side of each panel and they connect by sliding one over the other (Figure G-2).
To connect two panels, follow these few steps:
Figure G-1: Connect panels, inner
lock system
1.
Lift the panel with the male locks a few inches.
2.
Push it against the opposite panel; make sure to
apply pressure around the top and bottom
corners.
3.
Slide the panel down to lock it in place. Make sure
all the locks are connected (top and bottom).
4.
Inspect the panels and make sure they are leveled
(the panel's top is flat and matching).
Figure G-2: Inner-Locking System
Latch System:
The Latch Locking System is two brackets that lock together bypassing the main loop over the
opposite side and locking latch (Figure G-3).
10
