Fig:14
Fig:13
Fig:12
Three pc. Cover
Reinstall top cover making sure to line up
tabs on back (Fig.12). Then install side
panels by placing on rail guides (Fig.13),
and sliding towards back of chassis. Use
hex screws to fasten side panels in place.
To replace top cover, spread sides as
shown in (Fig. 14). Slide vertically down
and make sure slide fasteners guides are
properly set in the rails. Once top cover is
set properly on the rails, slide away from
you to close the top cover. Use hex head
screws to fasten top cover to chassis.
One pc. Cover
Fig:9
Fig:11
Fig:10
**Depending on M/B, you might have
To remove drive cassette**
A
. Identify if M/B is AT, ATX or microATX.
B.
Place chassis on its side with electronic
Bay in view (Fig. 9)
C.
Using your choice of standoffs or stakes
to fasten M/B, prepare and screw into
mounting plate.
D.
Make sure punch out holes for I/O ports
on the I/O plate are punched out matching
ports on the M/B.
E.
Install at an angle, first by lining up the I/O
ports on the M/B with I/O plate. (Fig. 10)
F.
Once holes are lined up, set M/B on
standoffs or stakes and make sure the
M/B is seated properly. (M/B mounting
screw holes vary with manufacturer.
Please refer to M/B user manual for
details.)
G.
Fasten M/B using hex head screws.
H.
Connect wiring as directed in M/B user
Manual.
Step 6. Install the power supply (P/S)
Slide into P/S area and fasten with hex head
screws (Fig. 11).
