EN
1. Remove milk tank from housing.
2. Remove lid of milk tank.
3. Empty milk tank and rinse milk tank and lid with warm soapy water thoroughly. Pull up silicon
cover and rinse under tap water(fig.5). Do not pull silicon cover out.
4. Clean frothing tube with water.
5. Detach milk tank connector from milk tank by turning it from
to
to unlock (fig.6), pull
it out and rinse by tap water. After cleaning, insert milk tank connector in milk tank and turn it
from
to
to lock in place.
6. Place lid on milk tank and slide milk tank back to the housing.
Steam nozzle:
1. Fill water in milk tank and put it back to the housing.
2. Switch on the appliance.
3. Turn froth control knob to the clean position ‘
clean’.
4. Press and hold
Latte/clean
button for 3 seconds, the appliance starts cleaning function
approximately 30 seconds.
5. Press
Latte/clean
button again to stop the process.
6. Turn off switch
7. Unplug the appliance after cleaning.
Drip tray:
remove drip tray from the housing. Lift up drip tray grid out of drip tray. Empty drip tray
and clean with mild soapy water. Rinse under water and dry thoroughly before storing. Replace the
drip tray with grid to the housing.
Drip tray for small cup:
remove drip tray by pulling out gently. Clean with mild soapy water and rinse
thoroughly. Allow to dry through before replacing it back to the compartment.
Filter and filter holder:
empty filter holder after use. Remove filter from filter holder. Rinse under
warm water. Wash with a mild detergent at regular intervals. If filter is blocked, insert a pin into the
single hole in the base of filter.
Brewing head:
flush water through wipe with a damp cloth. Allow the appliance cool completely
before cleaning!
Water tank:
clean with clear water and empty water tank before storing. To remove lime from water
tank, fill white vinegar with water in water tank overnight. Empty water tank and rinse thoroughly.
Housing and cup tray:
clean with soft damp cloth and wipe dry.
14