EN
PREFER SETTING
The appliance allows the user make the prefer settings to brew coffees. Firstly fill water tank and
milk tank between
MIN
and
MAX
. Add coffee powder and insert the filter at the right position. Insert
the plug into mains power socket and press On/off switch to ‘ I ’. The appliance starts to work till the
indicators illuminate with no blinking. Place a regular cup under the filer or the tube. To make the
prefer settings as following steps.
Espresso
1. Press Espresso button one time firstly (Press twice for making 2-cup espresso manual setting) and
the one indicator lights on. Then quickly press and hold Espresso button again2 seconds and the
indicator start blinking slowly to tell the appliance goes into the manual setting mode.
Notes:
the water pump starts to work under the manual setting mode and a little voice due to
pump vibration comes up normally.
2. Release the button and leave the appliance continue to brew espresso.
3. Keep watching and press Espresso button one time again to stop when the output does meet the
individual prefer. All the indicators illuminate.
4. The appliance makes this individual prefer setting programmed and fixed successfully according
to the precise water flow. It will do the same Espresso output in the following runs.
Notes:
a. The appliance will keep the same individual setting except it is operated to erase the prefer
setting to the default setting.
b. The prefer setting will not succeed or fail to be programmed by the appliance if the water
flow during the individual prefer setting does exceed the adjustable range.
c. To repeat the steps above to set up the prefer setting if it is failed.
5. Press and hold Espresso button and press On/off switch to the position ‘ I ‘ to turn on the
appliance till the two indicators of Espresso blink slowly 5 times to restore the default setting.
The prefer setting of Espresso is erased.
Cappuccino
1. Press
Cappuccino
button one time firstly (Press twice for making 2-cup cappuccino manual
setting) and the one indicator lights on. Then quickly press and hold Cappuccino button again
about5 seconds and the indicator keep illuminating and the appliance goes into the manual
setting mode. Continue to press and hold the button and watch the frothing milk output till
it does meet the individual prefer.
Notes:
the water pump starts to work under the manual setting mode and a little voice due to
pump vibration comes up normally.
2. Release the button and leave the appliance continue to brew cappuccino and finish it
automatically. All the indicators illuminate with no flashing. The prefer setting succeeds and it is
programmed and fixed successfully on the appliance.
3. The appliance will do the same cappuccino output in the following runs.
Notes:
a. The appliance will keep the same individual setting except it is operated to erase the prefer
setting to the default setting.
b. The prefer setting will not succeed or fail to be programmed by the appliance if the water
flow during the individual prefer setting does exceed the adjustable range.
c. To repeat the steps above to set up the prefer setting if it is failed.
12