EN
10
Makingan espresso
4
1. Fill water tank with water between
MIN
and
MAX
.
2. Plug the appliance to main power.
3. Switch on by pressing the on/off switch to position ‘ I ’ . All indicators lights up and blink.
4. When 6 indicators stay illuminated, the appliance is heated up and ready to use.
5. Select 1-cup filter or 2-cup filter and fit it in filter holder. (Selector 1-cup filter to make one
cup of espresso while 2-cup filter is to make two cups of espresso.)
6. Use measuring spoon to fill coffee and tamp down coffee by the end of the spoon.
7. Fit filter holder on brewing head by holding handle and turn filter holder from
to
to tighten. (fig.4)
Notes:
do not over tighten.
8. Place a cup below filter holder.
Notes:
if you use a demitasse, pull drip tray for small cup out, place demitasse cup on it. Push
drip tray for small cup back in the compartment after use.
9. Press
Espresso/Extra
button to start making an espresso.
Notes:
press once for single shot coffee, indicator
lights up. Press twice for double shot
coffee, indicator
lights up. Press and hold 3 seconds for running continuously, press any
button to stop when coffee amount reach your desire.
10. Once cup is filled to desired level, press any button to stop operation.
11. Remove cups after few seconds.
Warning: do not remove filter holder when water is running through it.
12. Remove filter holder by holding the handle to turn from
to
.
13. Empty the used coffee grounds from filter. Turn filter holder upside down. Gently tap out the
coffee. Rinse with running water and dry it thoroughly.
14. Indicator lights off when the appliance is ready to make the next espresso.
15. Switch off by pressing on/off switch to
O
position after use and unplug the appliance.
16. Clean the appliance following
CLEANING AND CARE
.