EN
25
been given supervision
or instruction concerning
use of the charger in the
safe way and understand
the hazards involved.
Children shall not play with
the charger. Cleaning and
user maintenance of the
charger shall not be made
by children without adult
supervision.
●
If the supply cord is
damaged, it must
be replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
●
Only use this charger
151443.01 to charge the
battery pack 151219.01.
●
To charge the battery, use
only the charger supplied.
●
Never charge non-
rechargeable batteries.
●
During charging the
batteries must be placed in
a well-ventilated area.
Vibration and noise reduction
To reduce the impact of noise and vibration
emission, limit the time of operation, use low-
vibration and low noise operating modes as well
as wear personal protective equipment.
Take the following points into account to
minimize the vibration and noise exposure
risks:
●
Only use the product as intended by its
design and these instructions.
●
Ensure that the product is in good condition
and well maintained.
●
Use correct attachments for the product
and ensure they are in good condition.
●
Keep tight grip on the handles surface.
●
Plan your work schedule to spread any high
vibration tool use across a longer period of
time.
Residual Risk
Even if properly operating and handling this
product in accordance with all the safety
requirements, potential risks of injury and
damage remain. Due to its construction and
build, this tool may present the following
hazards:
a) Electric shock from insufficient insulation.
Do not use the product when the product or
your hands are damp or wet.
b) Ear damage if working without ear
protection.
c) There is a risk of a short-circuit due to
liquid penetrating the housing. Do not
immerse the product and the accessories
in water. And make sure that no water or
other liquid can enter the housing.
d) The tool holder must be firmly locked in
place before switching the product on, for
an insufficiently or incorrectly clamped
accessory could be catapulted out of the
tool holder uncontrollably upon switch-on.
e) Damage to your health caused by swinging
your hands and arms when operating the
tool for longer periods of time or if the tool
is not held or maintained properly.
Warning!
During operating, the product generates an
electromagnetic field which, under certain
circumstances, may impair the functionality
