24
INSTRUCTIONS FOR USE
Refilling the reservoir
Warning
Make sure the iron is unplugged from the supply mains before filling the tank with water.
1 Set the steam control knob (D) onto “0” (Fig. 2).
2 Open the cover (B) by pushing it upwards and, holding the iron horizontally, fill the water
tank up to the maximum level using the water measure (M) provided (Fig. 3).
3 Close the cover (B) again.
If your tap water is very hard, use demineralized water.
NEVER fill the tank above the level indicated by "max".
Do not pour vinegar, descalers or other scented substances into the tank: Otherwise, the war-
ranty may be revoked.
If it proves necessary to add water while ironing, always turn off the iron and unplug the power
cord before filling the tank with water.
Switching on the appliance
When using the iron for the first time, test it on an old piece of fabric to ensure that the sole
plate and water tank are completely clean.
it is possible that at the first use of iron there are spills of white powder from the plate; this is
normal and the effect will disappear after delivering some steam blows.
At the first use of the iron you may notice a delay in the formation of steam: this is normal and
is due to water entering into circulation in the iron. You may need to press the steam and spray
button several times for their proper operation.
Fig. 2
Fig. 3