3
4
ASSEMBLY AND SET-UP
NEED HELP? Visit our web site for replacement parts, product support, authorized partners and customer service contact information at
www.
.com.
WARNING
:
Keep fingers
clear of the pivoting mechanism
when folding or unfolding the
scooter. Make sure others are
standing clear.
◆UNFOLDING THE SCOOTER FOR FIRST TIME USE
1 To release the folding mechanism, place the scooter on the ground, put one foot on the deck plate and
pull the joint release lever up. R aise T - bar up until it is s ecurely locked in the upright position.
2 Fix and secure the handlebars by pulling up both left and right handlebars, the spring- loaded Sleeves
will lock the handlebars a utomatically.
3 Make s ure B OTH handlebars a re properly locked onto the T - Bar.
NOTE:
The joint release lever is s pring- loaded and will automatically lock in the upright position when
fully upright.
⑥
①
②
⑤
◆ADJUSTING THE HANDLEBAR HEIGHT
1 To adjust the height of the handlebars, open the quick- release lever and slide the T- bar to the desired
position and re- secure the quick release lever to lock into place. When the T- bar is raised to the maximum
height, depress the push button located directly below the quick release lever to unlock the T- bar.
NOTE: The tension of the quick release lever can be adjusted by manually tightening or loosening
the Allen bolt. Be careful not to over- tighten. You should always be able to open and close the
quick- release lever by hand and the T- bar should slide freely when the quick- release is open.
WARNING: Keep fingers
clear of the pivoting mechanism
when folding or unfolding the
scooter. Make sure others are
standing clear.
◆COLLAR CLAMP
Using a 5 mm Allen wrench, check that the collar clamp bolt(s) are tightened securely. This item is
tightened and quality inspected at the factory, but there is a slight chance that the effects of shipping or
handling may have caused the bolt(s) to loosen.
WARNING: Failure to
properly install and tighten the
collar clamp may cause the
rider to lose control and fall. If
you are having difficulty in
u n d e r s t a n d i n g t h e s e
instructions, please contact
Aest Customer Service for
assistance.
①
②
③
④
③
④
enjoybot