Battery will not hold charge
Can you power the unit using the included AC adaptor?
(Pages 10-11)
Is the power supply properly connected to a surge protector
or AC mains? (Page 10)
Unit turns off automatically
To conserve power, your Amigo HD will automatically go
into standby mode after so many of non-use. This is not a
malfunction. Check your personalized setting
s for ‘Auto
Standby’ if needed adjust your setting. (Page 20)
Amigo
HD begins to make a “beeping” sound
Approximately 15 minutes before shutoff the battery icon
(Red Bar) will be displayed for 2 seconds
– at this point
‘Status Indicator #2’ will blink, indicating low battery .
If the battery is nearly empty, and ready to shutoff, the battery
icon will be displayed with a partial ‘Red’ bar. At this point if
the Amigo HD is not plugged in within 1-2 minutes it will turn
off. (Page 13)
Unit becomes warm to the touch
Your Amigo HD integrates a camera, LCD and battery
charging unit inside a very small package, but is designed to
be completely safe and does not pose a risk of fire or
damage. It is normal for the Amigo HD to become warm
(sometimes, very warm) after extended periods of use.
However, this is completely normal and does not indicate a
malfunction.
Chapter 5 Troubleshooting
28
