Adjusting LCD Brightness:
Your Amigo HD is set to the brightness level 3 on the LCD
display when shipped from the factory. If desired, use the
Joystick
(toggle left to decrease right to increase) to adjust
the brightness of the LCD display.
Also located under ‘User
Settings’ see Page 21 as needed.
Turning LED Lighting ON/OFF
Your Amigo HD has built-in LED lighting to illuminate your
reading material. By default, this lighting will turn ON
automatically whenever the Amigo HD is powered on. It is
also possible to turn OFF the built-in LED lighting, if
desired. This may be useful when magnifying certain
objects with a highly reflective surface, such as a watch or
glossy photo. Use the following procedure to turn off the
LED lighting:
1. With the Amigo HD power turned on, Press and Hold the
BLUE
[Mode]
button then press the
[+]
SIZE together.
An icon will appear on the display to indicate the LEDs
have powered off.
2. To restore the LED lighting use the same combination
as before.
Display Time/Date
With the Amigo HD power turned on, press and hold the
GREEN
[Gallery]
button and the
[+]
SIZE to display the
current time and date. Use the button combination again to
Exit.
Chapter 3 Using the Amigo HD
17
Note: Each time the Amigo HD is powered on, it will
automatically default to the factory setting with the
LED lights ON.
