(a) To re-install the drawer, extend the runners.
Place the drawer onto the runners and slide it
back so that the runner hooks insert into the
rear of the drawer.
(b) Make sure the locator pins line up with the
holes in the bottom of the drawer and press
the drawer down so that the pins slot into
place.
6 Drawer re-installation
(a) All edges MUST be sealed with an approved
Silicone Sealant.
8 Sealing
INSTALLATION COMPLETE
INSTALLATION INSTRUCTIONS
VALENCIA
TM
Slim Vanity
(a) Select a basin mixer which is suitable for the
tap hole position of this Slim vanity range.
(c) Connect the water supply to the taps and waste
pipe to the waste outlet.
(d) Run hot and cold water and check for leaks.
When satisfied with the results move on to the
next section.
ENGLEFIELD
5
Locator pin
Runner hook
5 Waste and tapware
CLEANING AND MAINTENANCE
INSTRUCTIONS
For cleaning instructions, please refer to the
Owner’s Information Leaflet.
CONTACT AND WARRANTY
INFORMATION
Please visit our website for warranty and other
information.
Please refer to the Owner’s Information Leaflet
for contact information.
NEW ZEALAND
KOHLER NZ LTD
www.englefield.co.nz
AUSTRALIA
KOHLER CO.
www.englefield.com
50mm
(b) Fit the waste and tapware.
7 Drawer adjustment
(a) To tilt the drawer backwards, lift the drawer
body from the locator pin and turn the dial
anti-clockwise. To tilt the drawer forwards turn
the dial clock-wise.
