1 Drawer removal
Cabinets must be fixed to a nog and at least one stud in the wall. The nog size should be 50 x 75mm.
Use a stud finder to locate studs & nogs in finished walls.
(a) Open the drawer and
carefully lift up on the end of
the drawer to release it from
the runner locator pins. It may
be necessary to gently pry the
runner away from the drawer.
(b) The drawer is now only held
by the runner hooks at the
back and can be pulled out in
the direction shown.
CONSTRUCTION REQUIREMENTS
INSTALLATION
TOOLS AND MATERIALS REQUIRED - (Not Supplied)
INSTALLATION INSTRUCTIONS
VALENCIA
TM
Slim Vanity
To suit pipework
To suit screws
TOOLS
MATERIALS - Not supplied & must be purchased separately
Fixing washers
20mm
Head Screws
10g x 75mm Pan
3
Stud finder
Locator pin
Runner hook
50
850
A height of 850mm from the
floor to the top of the vanity
top is recommended.
50mm from top of
cabinet to centre
of nog.
overflow
DN32 waste with
