Page 5
INSTALLATION INSTRUCTIONS
STUDIO
Freestanding Bath
ENGLEFIELD
9) Reinstall the bath by placing it straight down so that the feet are directly in front of the
bracket openings, then sliding the bath away from you until it locks in place. Adjust the
mounting bracket positioning as necessary. Once the feet locate and lock in position
as desired, remove the bath and fully tighten the bracket fixing screws.
10) Adjust the feet so that the bottom of each foot is protruding approximately 5mm from the
underside of the bath. Tighten the nuts with a crescent or spanner. Overturn the bath
and place a spirit level across the rim. Adjust the feet until the bath is level with the
floor. Ensure the feet always extend below the bath shell to take the weight of the bath.
5mm
Foot in locked position
Foot in unlocked position
