Page 4
INSTALLATION INSTRUCTIONS
STUDIO
Freestanding Bath
ENGLEFIELD
6) Tape the template down to the floor and carefully remove the bath.
7) Mark the screw hole centres onto the floor for the appropriate bath model (1500 / 1800).
Marking the centre of the slot will give adjustment both in and out. Remove the template.
8) If present, remove the protective film from the mounting brackets.
9) Attach the mounting brackets to the floor using appropriate fixing screws. 12g screws
with flat washers are recommended. Make sure the brackets are fixed in the positions
marked on the template so that the bath can be slid in and out in one direction. Do not
fully secure the brackets at this stage.
Outer edge of ba
th (1500 & 1800)
Outer edge of ba
th (1500 & 1800)
Studio 1800 ba
th
loca
ted f
oot position
Studio 1800 ba
th
loca
ted f
oot position
Studio 1800 ba
th
loca
ted f
oot position
Studio 1800 ba
th
loca
ted f
oot position
This side up
Studio 1500 ba
th
loca
ted f
oot position
Studio 1500 ba
th
loca
ted f
oot position
Studio 1500 ba
th
loca
ted f
oot position
Studio 1500 ba
th
loca
ted f
oot position
Englefield S
tudio F
reestanding Ba
th
1500 & 1800 I
nstalla
tion
Templa
te
PN 1249068-
A A
pril 2015
Englefield S
tudio F
reestanding Ba
th
1500: 2589A
-0 1800: 2590A
-0
Direc
tion of push t
o lock
bath f
eet in
to br
ackets
Please ensur
e this t
empla
te is pr
inted a
t 100% siz
e (i.e: no scaling).
For r
eferenc
e:
1500 f
eet c
entr
es: 590mm x 210mm
1800 f
eet c
entr
es: 700mm x 360mm
