ENGLEFIELD
DURACYL WALL
INSTALLATION INSTRUCTIONS
Prepare sealant and adhesive cartridges.
Cut nozzle on sealant and adhesive cartridges
as shown in
below.
Pierce protective foil inside adhesive cartridge.
DURACRYL WALL INSTALLATION CONT...
Apply adhesive to wall board.
Do not use on previously painted, sealed,
ceramic or plastered walls.
Use only on the following substrates:
• Villaboard
• Fibre cement
• Plaster Board
Follow the pattern marked. Start at top working
your way down. Apply vertical pattern first then
fill in horizontal lines.
For shower walls with corner features remember
to apply the adhesive on the acrylic wall as
shown on previous page
.
50 mm
m
m
01
SILICONE
ADHESIVE
5 mm
ADHESIVE
BEAD
APPLYING THE ADHESIVE
Fig.12: Cutting cartridges
Apply sealant to shower tray or bath
fi
rst as
shown in
below.
Apply a bead of sealant for
50 mm
from both
front corners at base of upstand as shown.
Apply a second full length bead at top of upstand.
Fig.13: Apply beading to upstand
Page 7
Ensure the protective film
has been peeled back from
tiling bead of tray or bath
before applying sealant.
Leave the rest of the tray or
bath covered by the film to
protect it during installation.
!
IMPORTANT
Do not apply adhesive below
5°C. Temperatures below
this point will require the
adhesive to be warmed up
to assist with adhesive flow
and application.
Use only in ventilated areas.
!
CAUTION
5 mm
45°
5 mm
