ENGLEFIELD
DURACYL WALL
INSTALLATION INSTRUCTIONS
Page 4
CONSTRUCTION REQUIREMENTS - TIMBER FRAME
1) For showers, identify the type of installation required and construct timber frame in accordance with
below. Englefield recommends installing double studs to fix the wall retainers to.
A typical shower enclosure timber frame is shown in For the framing of bath tubs and
screens, please refer to the installation guide supplied with the product.
2) Fix wall board to the studs.
Fig. 3: Recommend Timber Frame
for Shower Enclosure Installation
C
D
WALL BOARD
884
1164
900 X 1200 X 900
750 X 900 X 750
739
864
984
964
1000 X 1000 X 1000
884
864
900 X 900 X 900
900 X 750 X 900
885
747
D
+2
-0
C
+2
-0
B
+2
-0
A
+2
-0
A
B
WALL BOARD
984
984
1000 X 1000
884
884
900 X 900
900 X 750
739
879
884
1184
1200 X 900
Fig.2: Corner (2 sided) Wall
Fig.1: Alcove (3 sided) Wall
Double studs
for shower
wall retainers
Double studs
for shower
wall retainers
Double studs
*Note: Dimensions are to the
finished surface of wall board.
for shower
wall retainers
Double studs
for shower
wall retainers
150mm
The wall board surface must be flat and plumb.
The corner must be square.
Do not plaster, paint or seal the wall board.
!
IMPORTANT
