44
/55
6. DVD
6.1 DVD Operation
•
To select DVD press “SOURCE” button and using the UP/DOWN “
▲
/
▼
” buttons
to select “DVD” and press “OK”.
•
Insert a DVD disc with the MIRROR SIDE FACING SCREEN. The mechanism will
draw the disc in automatically.
•
Inserting a disc incorrectly may cause damage to the Laser Optic. Do NOT place any
damaged, dirty or any disc which is not 12cm in diameter into the loader.
•
In most cases, the DVD title will be displayed together with a disc menu. Select the
feature required with the cursor buttons and press PLAY/PAUSE. To pause play, press
the Play/Pause button, press again to continue playing.
•
To stop playing press
▉
. Press once to pre-stop, if the disc is not removed the player
will continue from the “stopped” point when the play is pressed. Pressing STOP again
will fully stop the player.
6.2 DVD Setup Menu
To set up the DVD section to your requirements a series of menus are provided. With no
disc in the player, press the DVD SETUP button on the remote control. You will now see
the MENU.
6.2.1 General Setup Page.
Use the “
▲
/
▼
” buttons to select the item required and use the
→
button to select the sub
menu. In the sub menu use the “
▲
/
▼
” buttons to select the item required and press “OK”
to confirm.
TV Shape:
Some DVD discs have been authored in 4:3 aspect ratio format. To see the
material in its original mode, you may need to change the Aspect Ratio.
Normal/PS (Pan & Scan):
Black edges left and right will be seen.
Normal/LB (Letter Box):
Top and Bottom of the screen may be black.
Wide 16:9 (Wide Screen):
Full-width picture but may have black areas top and bottom.
OSD language:
Select the OSD language (English is default).
Last Memory (On/Off):
You may wish the player to remember where it finished playing
a disc and then remove the disc. When you stop the disc, the
player will automatically remember the point.
6.2.2 Audio Setup Page.
Downmix defaults to Stereo.
