Engl RACKHEAD 1060, Manual

Page: 16 / 25

Slave Out (Channel A and Channel B)
These two balanced stereo jacks patch out the two channels’ signals. Turn the Volume
(A or B) knob to adjust the volume.
Line Out Balanced
This balanced output provides a composite of the two channels’ signals.
Turn the Level knob to adjust the volume.
The signal may be tapped before (pre = raw input signal) or after
(post = processed signal) the tone controls and FX loop.
Speaker Output
To drive two cabinets, connect one each to SPEAKON® ports A and
B and press the
Bridged Poweramp switch . Each speaker
cabinet’s impedance may be no less than 4 ohms.
Page 16 / 25