Engl RACKHEAD 1060, Manual

Page: 13 / 25

Tuner Out
This stereo jack patches out a balanced composite of the two input signals. This circuit is
always enabled regardless of the
Mute setting.
Tapping its signal using a cord equipped with mono ¼” (6.35 mm) jack plugs will not harm
the amp.
Bi-Amping
Use a Y adapter with one stereo and two mono jack plugs to
bi-amp the RACKHEAD 1060.
Bi-Amping Out:
TIP: Low-Out
RING: High-Out
Twist the Crossover Frequency knob to dial in your preferred corner frequency.
Using the internal stereo power amp (Hi and Lo Out):
1.
Press the Bridged Poweramp switch
2. Insert the Y cord’s stereo plug into Bi-Amping Out
3. Insert one each mono plug into Ext. Input A and B
Page 13 / 25