►
►
►
►
►
▬
▬
▬
▬
▬
►
►
▬
▬
►
►
Working with Detergents
Taking a Break
five minutes or more
For dirt accumulation over a large
surface.
40° spray angle = White nozzle
For
moderate
dirt
accumulation
over
a
large surface.
Soap = Black nozzle
For
operating
with
detergents or
clean
-
ing with low pressure.
High pressure in nozzle area. Risk of
injury caused by improperly locked
nozzle.
Make sure you hear the "click" when
inserting the nozzle tip into the quick
connection.
Pull the nozzle to make sure it is
seated properly before operating your
unit.
To avoid serious injury never point
spray nozzle at yourself, other persons
or animals.
Detergents can only be applied with
the black detergent nozzle.
Install the black detergent nozzle for
detergent application at low pressure.
Fill the detergent tank with Detergent.
With the engine running, pull trigger to
operate unit.
Liquid detergent is drawn into the unit
and mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on
surface.
Always flush the detergent tank with
fresh water when the cleaning job is
done, to rinse/flush any remaining
detergents from the injection system.
NOTE: For best results see Cleaning
Tips for specific information on how to
clean different surfaces.
Never use:
Bleach, chlorine products or other
corrosive chemicals.
Liquids containing solvents (i.e., paint
thinners, gasoline, oils.)
Tri-sodium phosphate products.
Ammonia products.
Acid-based products.
These chemicals will harm the unit and
will damage the surface being
cleaned.
Use of these items will void the warran-
ty.
Move the engine stop switch to the
OFF position.
Release trigger and engage safety
lock.
10
25° spray angle = Green nozzle
For moderate dirt accumulation over
large surface.
-
