4. Upon receiving the alert, the handset sounds an audible double
beep alert and LCD displays "New call on Line 4".
5. Handset 15 can:
a. Ignore the new call; continue talking to Line 1.
b. Press FLASH key to switch to Line 4.
c. Subsequent pressing of FLASH key will toggle between Line 1
and Line 4.
d. Press END key while talking to a line will terminate that
particular call and automatically switch back to talking to the
remaining line.
Notes:
1. This built-in call waiting is separate from the Call Waiting feature
available from the local phone company. The phone company
provided Call Waiting functions on the same phone line, while the
Call Waiting functions for this system functions on two separate
phone lines.
rd
2. This feature only works for 2 lines. If a 3 phone call comes for the
same handset, the call will not be routed to the handset.
3. It is recommended to order from the local phone company Hunt
Group feature for all your lines and not subscribe to the Call
Waiting feature.
AA Configuration by Administrator
1. Administrator can change the following AA settings:
Record/playback new main greeting message.
Set number of rings before AA picks up a call.
Turn on/off the AA line-by-line.
Set Designated Handset ID for AA disabled line(s). Only the
Designated Handset can use that particular line for incoming and
outgoing calls. In other words, the line is now dedicated to a
particular handset.
Designate an operator, the handset which would answer un-
routable calls or when the caller chooses "Operator" when
prompted.
2. Change AA Parameters:
a. From an administrator handset (Handset 10 or 11), press Menu
(Right) soft key.
b. Press number "9", this will enter administration menu.
c. Press number "1", handset enters AA setting menu.
(i) Press "1" and follow instruction to record new greeting
message.
(ii) Press "2" to playback the current greeting message.
35
