Advanced Operations
Handset Registration
1. If your handset(s) is purchased as part of a system, it has been
pre-registered with the base station at the factory.
2. You need to register the handset with the base station in the
following situations:
a. If a handset displays a Handset ID "00," that means it is a new
handset or the ID has been erased.
b. In certain situations, you may want to change a handset's ID.
For example, you want to change a particular handset from a
user to an administrator (ID 10 or 11), or vice versa. Or in some
rare occasions, you find another handset having the same
handset ID.
3. Registration:
a. Press handset Menu (Right) soft key.
b. Press the number "6", this will enter the handset registration
menu.
c. Press and hold the base's Registration (REG) button for 2
seconds until the L1, L2, L3, and L4 LED come on.
d. Press handset key "1", this completes the registration process.
The base station will assign a handset ID between 10 and 99.
The assigned ID will be displayed on the handset LCD, indicating
successful registration.
e. Repeat above steps for all additional handsets.
f. The first two handsets registered will be given ID 10 and 11,
which gives them administrator privileges.
4. De-registration:
a. You can de-register a handset from a base. De-registration will
reset the Handset ID to 00, erase the system security code, and
free up the old ID for future registration.
b. After deregistration, the handset will not be able to use the base
to make or receive phone calls, nor can it intercom other
handsets.
c. Press handset Menu (Right) soft key.
d. Press the handset number key "6", this will enter the handset
registration menu.
e. Press and hold the base's REG button for 2 seconds until L1, L2,
L3, and L4 LED come on.
28
