Long Range Wireless Access Point / Client Bridge
Version 1.0
32
Device
Name
:
Specify
a
name
for
the
device
(this
is
not
the
SSID),
Country/Region
:
Select
a
country
from
the
drop
‐
down
list.
Operating
Mode
:
Select
and
operating
mode.
Configuration
for
each
operating
mode
is
described
in
their
respective
chapters.
Click
on
the
Apply
button
to
save
the
changes.
5.3.2
IP
Settings
Click
on
the
IP
Settings
link
under
the
System
drop
‐
down
menu
This
page
allows
you
to
configure
the
device
with
a
static
IP
address
or
a
DHCP
client.
IP
Network
Setting
:
Select
Obtain
an
IP
address
automatically
(DHCP)
radio
button
if
the
Access
Point
is
connected
to
a
DHCP
server.
This
will
allow
the
Access
Point
to
pass
IP
addresses
to
the
clients
associated
with
it.
You
may
select
Specify
an
IP
Address
radio
button
if
you
would
like
the
device
to
use
a
static
IP
address.
In
this
case,
you
would
be
required
to
specify
an
IP
address,
subnet
mask,
and
default
gateway
IP
address.
IP
Address
:
Specify
an
IP
address
IP
Subnet
Mask
:
Specify
the
subnet
mask
for
the
IP
address
Default
Gateway
:
Specify
the
IP
address
of
the
default
gateway.
Click
on
the
Apply
button
to
save
the
changes.
5.3.3
Spanning
Tree
Settings
Click
on
the
Spanning
Tree
link
under
the
System
drop
‐
down
menu
Spanning
‐
Tree
Protocol
is
a
link
management
protocol
that
provides
path
redundancy
while
preventing
undesirable
loops
in
the
network.