EnGenius ENS200EXT User Manual Download Page 76

Page: 76 / 90

ASIC

ETWORK

ETTINGS

ONFIGURING

YSTEM

IME

4-48

4.5.7 Configuring System Time

Change the system time of the ENS200EXT by manually entering the information, synchronizing the device with a PC, or setup auto-
matic updates through a network time (NTP) protocol server.

Manually Set Date and Time

Enter the date and time values in

the date and time fields or click the

Synchronize with PC

button to get the date and time values from the administrator’s
PC.

Automatically Get Date and Time

Select a time zone from the

drop-down list and check whether you want to enter the IP
address of an NTP server or use the default NTP server.

Enable Daylight Saving

Click to enable or disable daylight

savings time. Select the start and stop times from the

Start

Time

and

Stop Time

dropdown lists.

Click

Save/Apply

to apply the changes or

Cancel

to return

previous settings.

Summary of Contents for ENS200EXT



























































































Search results

Summary of Contents for ENS200EXT

Reviews:

Related manuals for ENS200EXT

Brands by name

Popular brands

EnGenius ENS200EXT, User Manual

Search results

Summary of Contents for ENS200EXT

Reviews:

Related manuals for ENS200EXT

Brands by name

Popular brands