EnGenius ENH202 User Manual Download

Page: 37 / 88

1.4 Client Router Mode

Wireless Mode

The wireless mode supports 802.11a/n mixed operation. It is
compatible with the most common wireless bands.

SSID

Specify the SSID, if known. The SSID text box will be automatically
filled in if an AP in the Site Survey is selected.

Site Survey

Use Site Survey to scan nearby APs, and then select the AP to
establish a connection.

Prefer BSSID

Specify the MAC address, if known. Prefer BSSID text box will be
automatically filled in when an AP in the Site Survey is selected.

Wireless Security

Please refer to Chapter 6.2 for details.

Accept / Cancel

Press

Accept

to confirm the changes or

Cancel

to return to the

previous settings.

Accept does not apply the changes – you must go to Status -> Save / Load

to apply the new settings. Please refer to Chapter 4.1 for more information.

Summary of Contents for ENH202

























































































Search results

Summary of Contents for ENH202

Reviews:

Related manuals for ENH202

Brands by name

Popular brands

EnGenius ENH202, User Manual

Search results

Summary of Contents for ENH202

Reviews:

Related manuals for ENH202

Brands by name

Popular brands